SCHOOL OF PACKAGING PH.D. AND M.S. THESES TITLES COMPLETED 1988 - 2008

Copies of theses are available through Bell & Howell Information and Learning. To obtain a copy of a thesis, please write or call:

Proquest Information & Learning
300 North Zeeb Road
Ann Arbor, MI 48106-1346 USA
800-521-0600
734-761-4700

Printed sheets are 6.5" x 8.25"

Ph.D. Degrees Granted by the School of Packaging
Michigan State University
1998 - 2008

Product/Package Interaction: Effect of Physical, Chemical, and Climatic Environments. Mark D. Newsham, 1998.

Shock Response Spectrum and Fatigue Damage: A New Approach to Product Fragility Testing. Matthew Paul Daum, 1999.

The Effect of Reaction Processing on the Physical, Morphological, and Barrier Properties of Poly(Ethylene 2,6-Naphthalene Dicarboxylate)/Poly(Ethylene Terephthalate) Blends. Rujida Uthaisombut, 2001.

Analysis of the Relationship Between Peel and Burst Test Results for Peelable Flexible Packages. Rosamari Feliú-Báez, 2001.

Towad a Performance Standard for Typeface Legibility: The Lockhart Legibility Instrument. Laura L. Bix, 2001.

GC-MS and Electronic Nose Analysis of Off-Flavor Components in HDPE Containers and Correlation with Sensory Evaluation. Pattra Maneesin, 2001.

Development of Corrugated Fiberboard Performance Specification for Boxes Containing "Flowable" Products. Supoj Pratheepthinthong, 2002.

Electronic Sensor Array Incorporating Artificial Neural Network Algorithms for Rapid Identification and Quantification of Escherichia coli and Salmonella enterica Serovar Typhimurium and Their Volatile Metabolites. UbonRatana Siripatrawan, 2002.

Thermal Insulated Packaging Design with S-flute Corrugated Board. Oranis Panyarjun, 2002.

Development of a Computer Model to Evaluate the Ability of Plastics to Act as Functional Barriers. Jong-Koo Han, 2002.

Effect of High Pressure Processing for Packaged Foods on the Mass Transfer and Mechanical Characteristics of the Flexible Packaging Materials. Cengiz Caner, 2002.

Development of an Antimicrobial Film for Food Packaging. Paweena Limjaroen, 2002.

Development of a 1-Methylcyclopropene Package Delivery System to Control Tomato Ripening.  Youn Suk Lee, 2003.

Measuring and Modeling the Effect of Time and Temperature on Removal Torque and Sealing Force of a Continuous Thread Closure. Supachai Pisuchpen, 2003.

Package Performance for Liquid Hazardous Materials in High Altitude Shipments. Jagjit (Jay) Singh, 2003.

Designing a Package for Pharmaceutical Tablets in Relation to Moisture and Dissolution. Seungyil Yoon, 2003.

Microcellular Foam of Polymer Blends of HDPE/PP and Their Composites with Wood Fiber. Pornchai Rachtanapun, 2003.

Mathematical Modeling of Static Long-Term Storage of Corrugated Boxes. Manoch Srinangyam, 2003.

Analysis of Package Labeling: an Evaluative Tool to Compare Cost Structures and Implementation of Postponement Strategies. Irem Aydinsoy Kiyak, 2003.

Quality Issues and Shelf Life Evaluation of Packaged Olive Oil in Glass and Plastic Containers.  Antonis Kanavouras, 2003.

Investigation of Polylactide as Packaging Material.  Rafael A. Auras, 2004.

Evaluation of Light-Oxidized Off-Flavors in Reduced Fat Milk and Cheddar Cheese Using Sensory Evaluation and the Electronic Nose.  Hsin-Yen Chung, 2004.

Mathematical Models to Predict the Performance of Insulating Packages and Their Practical Uses.  Seung-Jin Choi, 2004.

Evaluation of Light-Oxidized Off-Flavors in Reduced Fat Milk and Cheddar Cheese Using Sensory Evaluation and the Electronic Nose.  Hsin-Yen Chung, 2004.

The Effect of MCP on the Quality of Fresh-cut Apples and the Development of MCP Controlled Release Devices. Krittika Tanprasert, 2005.

LCA - A Critical Review of Estimation of its Uncertainty in the Comparative Evaluation of Packaging Systems. Dario Martino, 2006.

The Effect of Pressure Differential on Microbial Penetration of a Sterile Medical Device Tray. Jane Severin, 2006. Bix

Correlation of Analysis of Odor Profiles of HDPE Films Coated with Different Adhesives Using Electronic Nose, Sensory Evaluation, and GC-MS. Li Xiong, 2006. Selke

Modified Biobased Materials from Polyhydroxyalkanoates for Packaging and Engineering Applications. Yashodhan S. Parulekar, 2007. Mohanty

Production and Properties of Biomax® Microcellular Foams. Napawan Kositruangchai, 2007.

Evaluation of the Effect of Chlorine Dioxide and Allyl-isothiocyanate on the Growth of Salmonella Typhimurium and Listeria Monocytogenes on Fresh Chicken Breast and Effect of Chlorine Dioxide Exposure on the Physical Properties of Plastic Films. Joongmin Shin, 2007.

Modification of Polylactide Bioplastic Using Hyperbranched Polymer Based Nanostructures. Rahul Bhardwaj, 2007.

M.S. Thesis Degrees Granted by the School of Packaging
Michigan State University
1984 - 2008

Effect of Pouch Film Permeability on the Growth of Pseudomonas Aeruginosa. Mark Gammage, 1984.

Introduction to Food Package-Display Techniques. Andres Giraldo, 1984.

Evaluation of the Compression Strength of Corrugated Shipping Containers Held in Frozen Storage. Edward Olusola Omotosho, 1984.

Electrostatic Attraction of Micro-Organisms to Polystyrene. Steven B. Lyman, 1984.

An Economic Study of the New Tamper-Resistant Packaging Regulation. Valerie Hamm, 1984.

Prediction of Moisture Content of Oral Solid Drugs After Unit Dose Repackaging. Nicholas Gus Fotis, 1984.

The Effects that Capacity and the Dates of Handling have on Motor Freight Loss and Damage. David Steven Kirsch, 1984.

Predicting the Moisture Uptake of Tablets Packaged in Semipermeable Blister Packages and Stored Under Static Conditions of Temperature and Humidity. John Stevenson Fulcoly, 1984.

The Determination of the Stability of Metaproterenol Sulfate Inhalant, Succinylcholine Chloride Injection, and Thiamylal Sodium Injection in Plastic Syringes and Glass Syringes or Vials. Barbara Lynn Fritz, 1984.

Evaluation of Loss of 2-Tertiary Butyl-4-Methoxy Phenol (BHA from High Density Polyethylene Film. Jong Koo Han, 1984.

An Investigation of Packaging Systems for Computer Terminals Exported from Taiwan. Ming-Ren Sun, 1985.

Prediction of the Moisture Uptake by a Packaged Moisture Sensitive Pharmaceutical Product Stored Under Fluctuating Temperature and Humidity. Mark J. Wang, 1985.

A Study of the Effects of Package Simplification on a Total Corporate System. Donald H. Shervey, 1985.

Carbon Dioxide Evolution as a Measure of Damage to Fresh Apples Handled in Corrugated Shipping Containers. James M. Brown, 1985.

"In-Package" Ripening of Loose Blue Cheese Curds. Crystal Aque Morrison, 1986.

The Design of an Industrial Shipping Container: A Practical Approach. Terry Michele Ciccaglione, 1986.

The Effect of Packaging Material and Storage on Corn Seed Germination Rates. Donald L. Abbott, 1986.

The Effect of Ribbing on Shock Transmission Through Expanded Polystyrene Cushion Material. George Kuo-Hsin Chen, 1986.

The Effect of Fluorescent Light on Riboflavin and Flavor Quality of 2% Milk Packaged in High Density Polyethylene Containers. Fred Charles Octel, 1986.

Color and Flavor Stability of Frozen Pizza. Vanee Komolprasert, 1986.

Comparison of Field Testing and Laboratory Testing for Tomatoes in Distribution Packages in Brazil. Elizabeth de Fatima Gazeta Ardito, 1986.

Evaluation of the Effect of Relative Humidity on the Permeation of Toluene Vapor Through Barrier Films. Kenny Jae-Kae Liu, 1986.

The Aroma Permeability and Solubility of Two Cereal Package Liner Materials and Their Relationship to Product Quality. Susan Marie Braun Mohney, 1986.

The Influence of Selected Barriers and Oxygen Absorbers on Product Stability. Chihiro Sakamaki, 1987.

The Effects of Tensile Strain on the Performance of High-Barrier Retortable Pouch Material. Scott Allan Morris, 1987.

Shelf Life of Freeze Dried Yogurt. Sharon Minnie, 1987.

The Measurement and Analysis of the Diffusion of Toluene in Polymeric Films. Albert Lawrence Baner, 1987.

The Influence of Aroma Compound Absorption on Mechanical and Barrier Properties of Sealant Films Used in Aseptic Packaging. Kazuhiko Hirose, 1987.

Detection of Volatiles Evaporating From a Plastic Container After Being Microwaved. Lynn Dixon, 1987.

Temperature Dependency of the Equilibrium Sorption Isotherm and Its Utility in Shelf Life Simulation of a Packaged Moisture Sensitive Pharmaceutical Tablet. Chong Hyun Lee, 1987

Investigation into the Test Variables found in Inclined Plane ASTM 3334 and TAPPI 503 Test Methods Applied to Woven Polypropylene Fabric. Su-Er, Joe, 1987.

Characteristic Changes in Recycled HDPE from Milk Bottles. Chate Pattanakul, 1987.

The Effect of Transient Vibration on the Top-To-Bottom Compressive Strength of Unitized Corrugated Shipping Containers. Alan Robert Adams, 1987.

Temperature Dependency of the Equilibrium Sorption Isotherm and its Utility in Shelf Life Simulation of a Packaged Moisture Sensitive Pharmaceutical Tablet. Chong Hyun Lee, 1987.

The Effect of Outer Package on Shock Absorbing Characteristics. Takeski Inagaki, 1987.

Interaction of Polymeric Packaging Materials with Flavor Components from an Onion/Garlic Favored Sour Cream. Janet Marie Toebe, 1988.

The Effect of Temperature on the Diffusion of Ethyl Acetate Through Oriented Polyethylene Terephthalate Films on Varying Thermomechanical History. Akira Shirakura, 1988.

The Storage Stability of a Moisture Sensitive Oral Solid Drug Product in Bulk and Blister Packages: The Effect of Repetitive Opening and Closing of Bulk Packages. Leo Clifford Pires, 1988.

Developing a Mathematical Model for a 45 Degree Edge Drop to Predict the Dynamic Behavior of a Low Density Closed-Cell Foam. Kuang-Nan Taw, 1988

Dynamic Analysis of a Less Than Truckload Shipment. Jorge Marcondes, 1988.

Absorption of Organic Volatiles by Sealant Films. Takayuki Imai, 1988.

Mass Transfer of 3, 5-DI-Tert-Butyl-4-Hydroxytoluene (BHT) from High Density Polyethylene Film and its Influence on Product Stability. Parvin (Heidi) Hoojjatt, 1988.

Legibility of Child Resistant Bottle Caps by Two Methods of Measurement. Mutune Wa Gitau, 1988.

Packaging Engineering Drafting and Design. Suzan Lang, 1988.

The Development of a Method for Deriving the Correlation Between Free Fall and Shock Machine Drop Height Based on Equivalent Velocity Change. Fanfu Li, 1988.

On the Effect of Moisture Content on the Shock Transmission Properties of Honeycomb Cushioning. Punnapa Asvanit, 1988

Apple Juice Aroma Compound Sorption by Sealant Films. James Konczal, 1988.

Mechanical Property Enhancement of Recycled High Density Polyethylene/Wood Fiber Composites Due to the Inclusion of Additives. Kristine Nieman, 1989.

Aroma Analysis of a Fruit Flavored Cereal Product: Influence of Package Liner Systems on Headspace D-Limonene Concentration as Measured by Gas Chromatography and Corresponding Sensory Evaluation. Sherry Hsien-Wen Hsia, l989.

Compression Performance of Corrugated Fiberboard Shipping Containers having Fabrication Defects: Fixed versus Floating Platens. Mary Langlois, l989.

An Evaluation of the Overall Effectiveness of Current Tamper Resistant/Evident Packaging Forms. Lisa Hewartson, l989.

Processing-Morphology-Property Relationships for Compounding Wood Fibers with Recycled HDPE Using a Twin-Screw Extruder. Binoy Gogoi, l989

A Comparison of Peak Acceleration in Cushioned Drops: Accelerometers vs High-Speed Video Method. Jeffery Waldeck, l989.

Downforce to Remove and Consumer Perceptions of Type 1A Continuous Thread Child-Resistant Closures. Beth Waggoner, l989.

The Effect of Sorption of Flavor Volatiles on the Adhesive and Cohesive Bond Strength of Multilayer Laminations. Mark Alan Schroeder, l989

The Effect of Simulated Handling on the Compression Performance of Corrugated Fiberboard Containers. Bruce Crofts, l989.

The Effect of Multiple Impacts on the Cushioning Properties of Closed Cell Foam. Troy Totten, l989.

Application of Quality Function Deployment in the Production of Flexible Packaging. Maria Rubino, 1989.

Rate of Lipid Oxidation at Constant 02 Concentrations. Claire Koelsch, 1989.

The Effect of Temperature and Vibration Combinations on Emulsion Stability of Mayonnaise in Two Different Package Types. Jeffrey Philip Mackson, 1989.

Mechanical Characteristics of Composites Made from Recycled HDPE Obtained from Milk Bottles. Varsha Kalyankar, 1989.

Measurement of Lateral and Longitudinal Vibration in Commercial Truck Shipments. John Rodney Antle, 1990.

A Comparison of Vertical Vibration Levels For Leaf Spring Versus Air Ride Trailer Suspensions. Charles David Pierce, 1990.

Quality Improvement in a Corrugated Converting Plant: An Application of Statistical Process Control. Carolyn Ann Niedermeier, 1990.

Survey of the Marketing and Purchasing Practices for D.I. Aluminum Cans in Japan. Takaaki Takeuchi, 1990.

Burst Testing for Paperboard Aseptic Packages with Fusion Seals. George W. Arndt, Jr., l990.

The Effects of Dual Additive Systems on the Mechanical Properties of Aspen Fiber/Recycled High Density Polyethylene Composites. Maria D. Keal, 1990.

The Effect of Cyclic Environments on the Compression Strength of Boxes Made from High-Performance (Fiber-Efficient) Corrugated Fiberboards. Antika Boonyasarn, 1990.

Solid Waste Integrated Packaging Evaluation System. Brian Peter Saputo, 1991.

An Alternative Method for Determining the Damage Boundary Curve of a Shock-Sensitive Product. Gary Allen Lieberman, 1991.

The Evaluation of a Recommended Test Procedure for Quantifying the Triboelectric Charging Propensity of Conductive and Insulative Films. C. William Hall, 1991.

Drop Heights Encountered in the United Parcel Service Small Parcel Environment in the United States. Thomas Martin Voss, 1991.

Managerial Methods of Controlling Product Quality in Distribution: Damage Measurement, Analysis, and Correction. Caris Jean Palmer, 1991.

Composite Materials from Recycled Multi-Layer Polypropylene Bottles and Wood Fibers. Rodney James Simpson, 1991.

Modeling the Sorption of Water Vapor by a Semicrystalline Polyamide: Application of a New Interpretative Sorption Model. Kuniyoshi Ohashi, 1991.

The Influence of Microwave Heating on the Formation of N-Nitrosamines in Bacon. Shaun Chenghsiung Chen, 1991.

An Expert System Application to the Inspection Analysis of Paper Printing Quality in a Package Printing Company. Yoshinori Ueda, 1991.

Predicting Shock Transmission Characteristics for Ribbed Expanded Polypropylene Cushions Using Standard Cushion Curves for Flat Plank Cushions. Gary Carlton Granthen, 1991.

Shelf Life Prediction of a Packaged Moisture Sensitive Solid Drug Product Over a Range of Temperature and Relative Humidity Values. Monica Kirloskar, 1991.

Wood Fiber/High Density Polyethylene Composites: Ability of Additives to Enhance Mechanical Properties. JoAnna Denise Childress, 1991.

Permeation of Ethyl Acetate Vapor Through Silica Deposited Polyethylene Terephthalate Film and Composite Structures. Takashi Sajiki, 1991.

A Comparative Analysis and Error Estimation of Portable Data Recorders Used to Measure Package Drop Heights. Linda Kaye Graesser, 1991.

Reorganization of a Small Package Handling System at a United Parcel Service Distribution Facility. James Ellsworth MacDonald IV, 1991.

The Effect of Temperature and Sorbed Water on the Permeation of Acetone Vapor Through Amorphous Polyamide Film. Suresh Nagaraj, 1991.

The Effect of Neutralizing Cations on the Barrier Characteristics of a Surface Sulfonated Polystyrene Film. Lone Esbensen, 1991.

The Permeability of Binary Organic Vapor Mixtures Through a Biaxially Oriented Polypropylene Film. Taryn Marie Hensley, 1991.

An Evaluation of Tamper-Resistant Packaging: A Method for Measuring Tamper-Evidence. Ronald A. Iwaszkiewicz, II, 1991.

The Stability of a UV Absorber Incorporated Into Transparent Packages and Its Effect on the Photooxidation of Soybean Oil. Melvin Arthur Pascall, 1991.

Essential Factors to Enhance Growth of Integrated Recycling Systems for Post-Consumer Aluminum Cans and Plastic Bottles in Japan. Tetsuya Okamoto, 1991.

Sorption of Organic Penetrants by Amorphous Polyamide. Myunghoon Lee, 1991.

A Study of the Variables Affecting the Heat Seal Strength and Hot Tack of Ethylene-Vinyl Acetate Heat Sealant Copolymers. John Williams Spink, 1991.

Measurement of Volatiles from a Susceptor Material Using a Thermal Desorption Method. Hsien Ming Kwo, 1992.

A Comparison Between Various Package Cushioning Materials Based on Performance and Environmental Concerns. Nopporn Charnnarong, 1992.

Variables Affecting Interlayer Adhesion in Multilayer Laminate Structures. Timothy Lee Sharkey, 1992.

Effect of Ethanol Vapor on the Oxygen Permeability of Packaging Polymer Films. Sriprinya Ampolsak, 1992.

The Effect of Recycled Low Density Polyethylene Substituted in Virgin Linear Low Density Polyethylene as Polymer Blends on Mechanical Properties. Prapassara Nilagupta, 1992.

Recycling and Disposal of Industrial, Commercial, and Institutional Solid Waste and Polystyrene Foam: Results of a Survey. Kirk Arrowood, 1992.

An Application of the Finite Difference Method to Estimate the Shelf Life of a Packaged Moisture Sensitive Pharmaceutical Tablet. Jai Neung Kim, 1992.

Packaging Job Profile of Pharmaceutical Manufacturing Industries. Jose Raul Sosa, 1992.

Effect of Vibration and Package Type on Bruising in Apples. Ming Xu, 1992.

Measuring the Shock Response in Pallet Boxes on Horizontal and Incline Impact Testers Used to Simulate Railcar Coupling and Pallet Marshalling. Michael Horst Zabel, 1992.

Development of Software Package to Predict Temperature Variation in Trailers, Boxcars, or Containers. Raymond Cheung, 1992.

Performance of Recycled Corrugated Fiberboard Under Various Temperatures and Humidities. Supawadee Thewasano, 1993.

Quantification and Characterization of Adhesion Between Dough and Packaging Material. Shu-Shin Chou, 1993.

Effect of Package Barrier on the Oxidative Stability of Vacuum Packaged Fresh Pork Patties Subjected to "In-Package" Heat Treatment. Chia-Chin Sheu, 1993.

Loss in Compression Strength of Corrugated Containers as a Function of Stacking Pattern and Dynamic Compression. Eungjoo Kim, 1993.

Quality Improvement and Optimization of a Resina Capper on a Packaging Line: An Application of Statistics Utilizing the Taguchi Loss Function. Christopher Andrew Ian Clarke, 1993.

Transport of Fragrance Volatiles Through a Semi-Permeable Delivery System: The Effect of Temperature and Lid Membrane Composition. Booma Matur, 1993.

Development of a Methodology to Quantify Package and Label Legibility. James Pietrowski, 1993.

Comparison of Various ASTM and NSTA Vibration Test Methods for Product Packaging. Atiwadee Pichyangkura, 1993.

The Effect of Surface Sulfonation on Barrier Properties of Polymer Films. Kitti Wangwiwatsilp, 1993.

Measurement of the Effect of Water Activity on the Rate of Lipid Oxidation at Constant Oxygen Concentration. Corey L. Berends, 1993.

Finite Difference and Finite Element Modeling of Closed Cell Cushions with Block and Ribbed Geometries Based on Strain Dependent Terms. Andrew W. Chen, 1993.

Study of Lateral Shocks Observed During Fork Truck and Pallet Jack Operations for the Handling of Palletized Loads. Hector E. Rodriguez, 1993.

The Effect of Surface Sulfonation of High Density Polyethylene (HDPE) on the Mechanical Properties of HDPE/Wood Fiber Composites. Koichi Haraguchi, 1993.

The Influence of Packaging on Stability of Dried Whole Milk. Yupawadee Pattapanichchote, 1993.

Examination of Instrumented Shipping Box to Evaluate Dynamic Compression Force During Transportation Vibration. David Alan Leinberger, 1993.

Application of the Shock Response Spectrum to Product Fragility Testing. Matthew Paul Daum, 1994.

Corrugated Board as a Package Cushioning Material. Eric C. Wenger, 1994.

Sorption of Organic Penetrants by Amorphous Polyamide. Myunghoon Lee, 1994.

Modifying the Sorption Capacity of Polyethylene for Organic Compounds. Takashi Urata, 1994.

A Comparison of Various Packaging Loose Fill Cushioning Materials Based on Protective Performance and Environmental Concerns. Vanee Chonhenchob, 1994.

Oxygen Transport in 80/20 Nylon 6/(6I/6T), Blend at Various Humidity Values. Nat Pinitpongskul, 1994.

The Photo-Oxidation Degradation of Woven Polypropylene: Correlating Outdoor Weathering, Sunshine Carbon Arc Testing and Fluorescent Ultra-violet Condensation Testing. Jessie Lorraine Layfield, 1994.

Effects of Polymeric and Glass Microbubble Contamination on Recovered Materials from a Light Medium Hydrocyclone Separation of High Density Polyethylene From Polypropylene. Edward Aram Akkashian, 1994.

Pro-Active Packaging Systems for the Selective Sorption of Organic Volatiles. Kuo-Chung Yin, 1994.

Volatilization of Vanillin and Ortho-vanillin from a Corrugated Paperboard Shipper and Sorption by a Low Density Polyethylene Primary Container. Satoshi Maekawa, 1994.

The Photodegradation of Woven Polypropylene Using Accelerated Weathering Machines with Fluorescent Ultraviolet Tubes: Correlating the QUV and the UVCON. David M. Powers, 1994.

Development of Test Criterion for Simulating Truck and Rail Vibration and Impact Levels in Automotive Engine Steel Racks. Paween Rojnuckarin, 1994.

Rate of Lipid Oxidation at Varying Initial Oxygen Concentrations Using Oxygen Absorbing Sachets in the Packages. Dena Briggs Thomas, 1994.

Control of Off-Flavor and Odor Development in Packaged Frozen Fish During Storage. Lin-Bin Su, 1994.

The Effect of Surface Sulfonation on the Surface Free Energy, and Peel Adhesion Strength of Polymer Films. Insik Park, 1994.

Returnable/reusable Containers in the Automotive Industry and the Related Capital Budgeting Investment Decision. Wendee Valentine Uxa, 1994.

Measuring the Sorption and Diffusion of Water in a Moisture Sensitive Product for Use in Shelf Life Simulation. Patricia J. Allen, 1994.

Modified-atmosphere Packaging of Apple Slices: Modeling Respiration and Package Oxygen Partial Pressure as Function of Temperature and Film Characteristics. Ruomwadee Lakakul, 1994.

Performance Comparison of Plastic and Wood Pallets for Static and Dynamic Tests. Gary Singh Grewal, 1994.

Leakers in Gallon Size Plastic Bottles in Simulated Small Parcel Test Environment. Vivek Prakash Syal, 1994.

Mass Transfer of 3,5-Di-Tertieary-Butyl-4-Hydroxytoluene (BHT) from a Multi-layer Lamination. Lynne Bailey, 1995.

Reliability and Error Estimation for Mechanical Shock Recorders and Impact Indicators. Robert B. Stapleton, 1995.

A Study of Package Dynamics in Small Parcel Environment of United Parcel Service and Federal Express. Amritpal Singh Cheema, 1995.

A Study of the Package Dynamics in the United States Postal Services Small Parcel Delivery Environment Within the United States. Hesham S. El-Khateeb, 1995.

Rating the Environmental Impacts of Various Solid Waste Management Methods. Mun-Ling Salina Fung, 1995.

Correlation Between Transporation Time and Vibration Table Time. Deanna J. Rogers (Fell), 1995.

Surface Sulfonation of Polymers to Impart Selected Barrier Properties. Jing Y. Zhu, 1995.

Moisture Absorption Characteristics of 100% Recycled Corrugated Board. Shu-Sheng Wu, 1995.

Computer Programs for Advanced Packaging Dynamics. Sutthipong Na Songkhla, 1995.

The Effects of Cyclic Humidity on Compression Strength of Corrugated Pallets. Michael S. Dennis, 1995.

Modeling the Moisture Transfer of Two-component Food Products in a Flexible Package. Maria de Fatima Filipe Pocas, 1995.

Shock Fragility Testing of Fatigue-sensitive Products. Donald E. Baumdraher, Jr., 1995.

Difference in Torque Measurements Taken by Manual and by Automatic Cap Torque Equipment. Paul W. Rearick, 1995.

Compression and Dynamic Testing of Paper Corrugated Pallets at Standard and High Humidity Climates. Charles Ernest Ailsworth, III, 1995.

Surface Sulfonation of Polypropylene Resin to Improve the Mechanical Properties of Wood Fiber/Polypropylene Composites. Sudawan Supachokouychai, 1995.

Heavy Metals in the Ink Industry. Carla Maria Vidal, 1995.

Reduction in Box Compression Strength after Shipment through the Overnight Small Parcel Distribution Environment. Henrique Gnani Braun, 1996.

Loss in Compression Strength of Corrugated Containers Due to Offset and Its Effect on Stability of Palletized Loads. Sang-Yoon (Jim) Rha, 1996.

Permeability of Organic Vapors Through a Packaged Confectionery Product with a Cold Seal Closure: Theoretical and Practical Consideration. Chai-Hung Lin, 1996.

Permeation of 2-nonanone Vapor Through LLDPE Affinity Films as Apply to Modified Atmosphere Packaging. Mohd Ariff Wahid, 1996.

Consumer Attitudes about Open Dating Techniques for Packaged Foods and Non-prescription Drugs. Jongkyoung Kim, 1996.

Handling Difference Between Plywood and Corrugated Containers with and without Fragile Labels in Overnight Shipments. Timothy G. Weigel, 1996.

Effect of Shipping Orientation and Closure Type on Leakers in Gallon Size Bottles. Soumya Chakraborti, 1996.

Mass Transfer of a-tocopherol (Vitamin E) from a Multi-Layer Laminate Structure and Its Influence on Product Stability. Ju-Fen Lin, 1996.

Dissolution Stability for Packaging Application. Xuemei Qian, 1996.

Evaluating Isostatic and Quasi-Isostatic Procedures for Determining the Organic Vapor Barrier Properties Through Polymer Membranes. Shu-Jung Huang, 1996.

Use of 2-Nonanone Vapor to Control Decay in Modified-Atmosphere Packages of "Precut" Apple Slices. Rujida Leepipattanawit, 1996.

Aluminum Can Technology to Maintain Competitiveness by Reducing Cost. Tatsuya Hanafusa, 1996.

Evaluation of Parameters Impacting the Permeability of a Fragrance Delivery System. Hojoon Lee, 1996.

Organic Vapor Permeability of High Barrier Polymer Membranes by a Dynamic Purge and Trap/Thermal Desorption Procedure. Yueh-Hi Chang, 1996.

Consumer Attitudes about Open Dating Techniques for Packaged foods and Non-prescription Drugs. Jongkyoung Kim, 1996.

Production of Biopolymeric Films and Coatings from Wheat Proteins. Luis Martin Rayas, 1996. Corrugated Case Line Assessment. Jill J. Warnick, 1996.

Dissolution Shelf-Life of Unpackaged Solid Oral Drug Products. Sheau-shya Wu, 1996.

A Comparison of Solubility Coefficient Values Determined by Gravimetric and Isostatic Permeability Techniques. Christopher Barr, 1997.

Corrosion Inhibition: Art or Science? William J.O. Green, 1997.

The Barrier Characteristics of Clay/polyimide Nanocomposites. Jiajian (Georgia) Gu, 1997.

Theoretical Prediction and Observations of Peak Deceleration Levels for Perfect Edge and Corner Drops. John Jackson, 1997.

Returnable/Reusable Logistical Packaging: A Decision Support Framework and Modular Furniture Case Study. Scott Kibler, 1997.

Prediction of Shelf Life of a Moisture Sensitive Drug at High Relative Humidity and Temperature Using Dissolution as a Function of Moisture Content. Manisha P. Kokitkar, 1997.

Relation Between Road Time and Vibration Table Simulation Time Based on Compression Strength of Corrugated Boxes. Sara Hilda Languet, 1997.

Membrane Stretch Testing of Laminated Corrugated Phoenixboard for Corrugated Pallets. Dong Jun Lee, 1997.

Evaluating Functional Barriers to Prevent Migration of Contaminants from Post Consumer Recycled Plastic Fabricated into a Single Layer & Lamination Films. Weerasak Lertsiriyothin, 1997.

Economic Study of the Plastic Recycling Process Based on Hydrocyclone Technology. Neeracha Manidool, 1997.

Characterization of the Barrier Properties of Styrene Butadiene Copolymer (KR-10) Film. Derek McDowell, 1997.

Determination of the Partition Distribution of Vanillin and Ortho-Vanillin Between Corrugate Board and Headspace; and Between Low Density Polyethylene and an Aqueous Phase. Lei Pei, 1997.

Package Design for a Gas Range Product Line. Joe Martinez Rivera, 1997.

Determination of Diffusion and Prediction of Migration of Xyelene and 2,4-dichlorophenol through High Density Polyethylene. Richa Sharma, 1997.

Effect of Repeated Microwave Heating on the Impact Resistance of a Polypropylene Container. Ubonrat Siripatrawan, 1997.

Perceptions of Frozen Food Packaging by Japanese Consumers. Shinichiro Tanizaki, 1997.

The Relationship of Break-bulk Ship Loading Practice to Ocean Transit Damage Claims for Multi-wall Paper Bags. Hui Xu, 1997.

Computer Program Development for the Swipes Model. Natgritta Taveesook, 1997.

Analysis and Evaluation of Burst Test Methods Using Restraining Fixtures. Rosamari Feliu-Baez, 1998.

The Permeability of Binary Organic Vapor Mixtures Through Polymer Membranes by a Dynamic Purge and Trap/Thermal Desorption Procedure: Theoretical and Practical Considerations. Teerapong Laoharavee, 1998.

Problems and Causes for Barcodes that will not Scan at the Retail Level. Nucharin Luangsa-Ard, 1998.

Dynamic Modeling of Closed Cell Cushioning Material. Dmitiri V. Pokudin, 1998.

Composite of Wood Fiber and Mixed Recycled Thermoplastics. Sunetra Rojanarungtawee, 1998.

Evaluating Performance of Internal Packaging for Damage to Glassware. Jagjit (Jay) Singh, 1998.

The Effect of Surface Modification on the Printability of Polyolefin Film. Chanin Kulsetthanchalee, 1998.

Development and Characterization of Casein-Wax Edible Films. Jay Lyle Chick, 1988. The Effect of Subject Age on Legibility. Laura Bix, 1998.

Evaluation of Seven Different Lamination Structures Based on the Mechanical and Physical Properties. Andres A. Soto-Jimenez, 1998.

Migration of Soy Methyl-ester Based Products through Bottles. Paweena Limjaroen, 1998.

Processing and Mechanical Property Testing of Paper Fiber and High Density Polyethylene Composites. Thirayuth Chotipatoomwan, 1998.

Barrier Characteristics of Metallocene Polyolefins to Organic Vapors. David A. Singleton, 1999.

Prediction of Bending Strength of Long Corrugated Boxes. Oranis Panyarjun, 1999.

Effect of 2-nonanone Vapor on the Oxygen and Carbon Dioxide Permeability of Two Polymer Films. DeLynne Vail, 1999.

Hexanal Vapor to Control Decay of Sliced Apples in Modified-Atmosphere Packages Using Metallocene Film. Jeffrey J. Wolford, 1999.

Loss of Compression Strength in Corrugated Boxes During Overnight Shipments in UPS. Supoj Pratheepthinthong, 1999.

Dissolution Shelf Life of Hydroxypropyl Methyl Cellulose Coated Aspirin Tablets at I.C.H. Temperatures and Various Relative Humidities. Shannon Patrick Adams, 1999.

Simulation of a Dairy Plant Packaging Line. Jaemin Choi, 1999.

Moisture Shelf Life of Packaged Milk Powder. Krittika Tanprasert, 1999.

Reduced Packaging Analysis of Consumer Goods. Aaron F. Fitchko, 1999.

Measurement of the UPS Ground Shipping Environment for Large and Heavy Packages (Up to 150 Pounds). Zachary Grant Hays, 1999.

Effect of Capper Head Rotation Speed on Immediate Removal Torque. Xiaole Fan, 1999.

The Rate of Lipid Oxidation of a Product Model System Packaged in Antioxidant Impregnated Laminate Film Structures. Youn Suk Lee, 1999.

A Returnable Container System for Medical Device Components. Christine S. Block, 1999.

Sorption and Diffusion of Ethyl Acetate Vapor in Polyimide-Clay Nanocomposite Films. Wenzhen Cheng, 1999.

Comparison of Loose Fill Cushioning Materials for Shock Absorbing Capabilities and Settling During Vibration. Constance Maud Zesaguli, 1999.

Predicting Shock Transmission Characteristics of Convoluted Polyurethane Ester Cushions Using Standard Cushion Curves. Manoch Srinangyam, 1999.

High Density Polyethylene/Paper Fiber Composites: Measuring the Impact of Additives on Their Physical and Mechanical Properties. Jonathan J. Ricciardi, 1999.

Composite of Wood Fiber and Recycled HDPE Bottles from Household Use. Nualrahong Thepwiwatjit, 2000.

Model for Predicting Application Torque and Removal Torque of a Contnuous Thread Closure. Supachai Pisuchpen, 2000.

Shelf Life Estimationg of USP 10 mg Prednisone Calibrator Tablets in Relation to Dissolution & New Windows-Based Shelf Life Computer Program. Seung-yil Yoon, 2000.

The Effect of Relative Humidity on Permeability of Ethyl Acetate Through Polyamide Films at 60 deg C. Uruchaya Sonchaeng, 2000.

Dissolution Shelf Life of Prednisone Therapeutic Dosage Form Tablet. Matthew S. Thomas, 2000.

The Effects of Capper Rotational Speed and Magnetic Clutch Type on the Immediate Removal Torque of CT Closures. Bruce J. Natzel, II, 2000.

Validation of a Numerical Model for Prediction of Moisture Content for Binary Mixtures of Corn, Oats and Wheat Cereals in Semipermeable Packaging. Carlos Gustavo Castro, 2001.

Developing Test Methods to Evaluate Performance of Reusable Plastic Containers. Hussain A. Qurashi, 2001.

Correlation Between the Solubility Parameter as a Measure of Sorbate/polymer Compatibility and Sorbate Equilibrium Solubility in a Two-phase Aqueous/polymer System. Palarp Sailabada, 2001.

Multimedia as a Supplement for Teaching a Packaging Subject. Romont Jones, 2001.

Dissolution Shelf Life of Packaged Pharmaceutical Tablet by Prediction and Experiment. Jurmkwan Suemag, 2001.

Modified Atmosphere Packaging of Mango Slices in Polymeric Films. Sopacha Apichartvorasilp, 2001.

Cushioning Performance of Molded Pulp (E-Cubes) Loosefill. Geeta Govindan, 2001.

High Density Polyethylene/Wood Fiber Composites: Measuring the Effect of Processing Parameters on Their Physical and Mechanical Properties. Kajiporn Uerkanarak, 2001.

Heat Transfer Properties of Home Meal Replacement Product/Package Systems. Matthew A. Neumann, 2001.

Permeability of Organic Compounds Through Various Packaging Polymers Database. Jonathan B. Shaw, 2002.

Paneling of Plastic Bottles. Ramalingam V. Sellapareddy, 2002.

Manufacturer Attitudes about Open Dating Techniques for Packaged Foods and an Evaluation of Regulatory Implications. Bridgette M. Johnson, 2002.

Composite Material of Mixed Low Density Polyethylene/Polypropylene and Wood Fiber. Kobdaj Vanichvarod, 2002.

Development of a Material Testing Protocol for Evaluation of Radio Frequency Transponder Effects on Bloom Time of Beef Loin Muscle. Keith L. Vorst, 2002.

Evaluation of the Moisture Permeability Characteristics of Confectionery Product Packages with a Cold Seal Closure. Muhammad A. Zia, 2002.

A Model for the Implementation of a Radio Frequency Identification System into a Warehouse Environment. Michelle Renée Ryan, 2002.

Theoretical, Experimental and Computer Model for Package R-value Using Regular Ice and Dry Ice. Napawan Kositruangchai, 2003.

Effect of Storage Temperature and Packaging Systems on the Quality of Packaged Frozen Carrots. Dario Martino, 2003.

Use of Silver Zeolite as an Antimicrobial Agent in Packaging Film. Renae F. McKinley, 2003.

An Economic Analysis of the Effects of Recycling Focused on Bottle Collection Programs in the Packaging Sector. Yongseong Ha, 2003.

Development of Electronic Nose Method for Evaluation of HDPE Data, Correlated with Organoleptic Testing. Rajarshi Das, 2003.

A Performance Comparison of Thermal Insulated Packaging
for Single Parcel Shipments. Prasad Mulukutla, 2003.

Radio Frequency Identification Transponder Performance on Refrigerated and Frozen Beef Loin Muscle Packages.  John C. Onderko, 2004.

Designing a Senior Friendly and Child-Resistant OTC/Pharmaceutical Solid Oral Medication/Vitamin Supplemental Organizer/Dispenser Package.  Amy S. Houghtaling, 2004.

Effects of Extrusion Blow Molding Internal Cooling Technology on HDPE Container Performance.  Kirk A. Valko, 2004.

Photodegradation of Crop Trellising Plastic Twine. Maria-Paz González Mulet,
2004.

The Effect of Tag Orientation and Package Conent on the Readability of Radio Frequency Identification (RFID) Transponders.  Jeffrey Tazelaar, 2004.

Corrugated Cushion vs. EPS:  A Comparison of Cushion Properties.  Joongmin Shin, 2004.

Development of Electronic Nose Method for Evaluation of Residual Solvents in Low Density Polyethylene.  Isinay Yuzay, 2004.

The Effects of Electron Beam Cured Coatings on Polymer Substrates.  Norbismi Nordin, 2005.

Determination of Class 0 Radio Frequency Identification Tag Failure Modes.  Michael Jonson, 2005.

Development of Polylactic Acid (LA) Based Blends and Their Nanocomposites for Packaging Applications.  Mariappan Chidambarakumar, 2005. 

Comparison Study of Corrugated Fiberboard and Paperboard Partitions Towards Damage of Glassware. Sreekumar Ramasubramanian, 2005.

Compression Testing of Honeycomb Paper Pallets. Ravi Verma, 2005.

Development of Active Packaging for Retort Food; Application of Oxygen Scavenger. Yangjai Shin, 2005.

Development of Biodegradable Plastics by Blending a By-product of the Corn Based Ethanol Industry and Poly (ε-Caprolactone). Dinesh C. Aithani, 2005.

The Effect of Antennae Configuration, Product and Tag Type on Readability of Passive UHF RFID Transponders. Thomas John Silver Crawforth, 2005.

Effectiveness of Different Post Harves Treatments and Packaging Methods for Peeled Chestnuts. Kuo-Chun Yen, 2006.

Impact of Polymer Processing on Sorption of Benzaldehyde Vapor in Rubbery Polypropylene. Ying Qin, 2006.

The Use of a Universal Design Methodology for Developing Child-resistant Drug Packaging. Claudio Javier de la Fuente, 2006.

Child Resistant Drug Packaging and Arthritis: Can Older Consumers Access Their Medications? Eric Yao-Chung Kou, 2006.

The Effect of Conveyor Speed, Packaging Materials, and Product on the Readability of Radio Frequency Identification Transponders. Jonathan Ryan Thomas Falls, 2006.

The Influence of Water Content in Hydrated Superabosorbent Polymer on Dielectric Properties, Antenna Radiated Power, and RFID Tag Readability. Xuebing Zhang, 2006.

A Simple and Accurate Method for the Shock Mode Calibration of Piezoelectric Accelerometers. Thomas Jeremy Bruno, 2006.

Performance Testing and Comparison of Closures for Corrugated Shipping Containers. Pankaj Gaur, 2007.

Comparison on Different Packaging Materials to Determine Their Effects on Availability and Effectiveness of 1-MCP. Luis C. Rodriguez, 2007.

The Effect of Packaging Attributes on Consumer Perception of Cherry Juice. Audrey Whaling, 2007.

Determination of Fusion Temperature of Polyethylene Fiber Sheets by Measuring Temperature of the Melting Surface (MTMS) Method. Sony Agrawal, 2007.

Performance Properties of a Biodegradable Foam (Green Cell®) for Packaging Applications. Samina Arif, 2007.

Biodegradation of Commercially Available Biodegradable Packages in Real and Simulated Composting Conditions. Gaurav Kale, 2007.

Experiments for Climate Zone IV Hypothesis. Xin Li, 2007.

Descriptive Study of Michigan State University Waste Management and Recycling Practices and Recommendations for Improvement. Gaurav Dabholkar, 2007.

Effect of Package Configuration on Barrier Properties and Sensory Perception of Flavor. Pankaj Kumar, 2007.

Bioadhesives from Distiller's Dried Grains with Solubles (DDGS) and Studies on Sustainability Issues of Corn Ethanol Industries. Abhishek Singh, 2007.

Biodegradable Polymer Nanocomposites from Poly(alkylene Dicarboxylate) and Organically Modifed Montmorillonite Clay. Ajay Kathuria, 2007.

Use of QCM Technology for Measuring Barrier Properties of Biodegradable Packaging Material. Nitin Gulati, 2008.

Titanate and Silane Coupling Agents Based Surface Modification of clay and Their Effects on the Performance of Poly(trimethylene Terephthalate) Nanocomposites. Dhiraj Hasija, 2008.

Assessment of the Environmental Profile of PLA, PET and PS Clamshell Containers using LCA Methodology. Santosh Madival, 2008.

M.S. Non-Thesis Degrees Granted by the School of Packaging
Michigan State University
2000 - 2008

Heidi Moilenan (Prather), 2000. Ablity of the EDR-3 to Measure Drop Height for Shallow Non-Perfect Drops. Burgess

Matthew Moon, 2000. Reusable Plastic Containers vs. CFB's: A Comparison in Product Distribution. Singh

Melissa Holcomb, 2002. From Glass, to Iron, to Steel -- Why the "Tin" Can is Not (and the Rest of its Fascinating Story). Twede

Corey Mingerink, 2002. Measurement and Simulation of Long/Large Light-weight Packages in the FedEX 3-Day Saver Parcel Delivery Service. Singh

Mamtha Dhulipatha , 2003. Insulation Characteristic of Thermal Insulating Bags for Food. Singh

Pallavi Thakur, 2003. Thermal Insulation Performance of Containers Based on R-values. Singh

Anthony Kipp, 2003. The Development of a Model for Developing Graphical Representations of the Communication Area of Radio Frequency Identification Systems. Clarke

Mikir Patel, 2003. Difference in Torque Measurements Obtained by Manual and Automatic Torque Testers. Lockhart

Veronica Schlegel, 2003. Qualifying a New Header Bag. Lockhart

Richard Younger, 2003. Validation and the Role of IQ, OQ and PQ. Bix

Vipul Patel, 2004. Development and Validation of Simple Method to Measure Thermal Properties of Gel Packs. Burgess

Ondrea Kassarjian, 2004. Comparison of Scanning Electron Microscopy and Confocal Microscopy to Measure 50µm Excimer Laser Drilled Holes in PETG Medical Packaging Trays. Bix

Oliver Boata, 2004. Comparison of Test Methods for Evaluating Performance of Liquid Hazardous Material Packaging - Pressure and Vibration Effects. Singh

Syed Peer, 2004. Package Shipping and Container Closure Tests for Liquid Pharmaceutical Products. Singh

Matthew Kusmierz, 2005. On Line Learning Tool for PKG 480 (Packaging Laws and Regulations). Lockhart

Brett White, 2005. A Case Study on Bulk Packaging for Electronic Chassis Products. Burgess

Rudolfo Gonzalez, 2005. High-Barrier Films for Food Packaging. Downes

Matthew Kremer, 2005. The Effects of Low Pressure/Random Vibration on Consumer Bottles/Closures (Non-Hazmat). Singh

Thitisilp Kijchavengkul, 2005. The Effects of Fatigue on Fragility and the Damage Boundary Curve. Burgess

Juan Camarillo, 2005. Packaging for E-commerce. Singh

David Johnston, 2005. The Presentation Summarizes the Method, Materials and Process Used to Qualify the Shipping Cooler and Coolant Brick Configurations for a Temperature Sensitive Drug Product for Summer Transport. Bix

Sandeep Rana, 2005. E-commerce Distribution - Effects of Distribution on Damage. Singh

Lawrence Dull, 2005. Validation of a Design Safety Factor for Tops to Bottom Compression Strength of Corrugated Boxes. Burgess

Koushik Saha, 2005. Effect of Freeze-Thaw Cycling On The Box Compression Strength of Folding Cartons Made From Different Carton Materials. Bruce Harte

Young Ki Paek, Fall 2005. The Study of the Use of Pressure Sensitive Film as a Measure of Shock Severity During Package Handling. Singh

Ando, Marci-Ann, Fall 2005. Distribution Testing Validations for Medical Devices Mandate. Selke

Evers, John, Spring 2006. Vial Closure Project for Medical Diagnostic Radioactive Gas. Lockhart.

Jose Rodriguez, Spring 2006. Effect of Temperature on the Seal Strength and Saline Liquid Volume on the Internal Package Pressure Generated During Moist Heat Sterilization Process of a Contact Lens Medical Blister Package. Selke

Anthony Bantug, Spring 2006. Design and Testing of Cold Chain Packaging for Pharmaceutical Products. Selke

Michael Hoffa, Spring 2006. An Overview of the Labeling Requirements for Prescription Drugs. Bix

Lillian Tarazi, Summer 2006. Characterization and Shelf Life of Flexible Packaging for Dry, Oily, Liquid and Frozen Food Products. Harte

Joan Hernandez, Summer 206. A Practical Systematic Approach to Assess Compatibility Between Package Contents and Flexible Laminated Structures. Rubino

Nalinee Nammechai, Summer 2006. An Alternative Material for Blood Bags: Biodegradable Blends. Bix

Giovani Rissi, Spring 2007. Measurement Study of the Truck Transport Environment in Brazil. Singh

Sujeet Adudodla, Spring, 2007. Measurement and Analysis of the Next-day and Second-day Air Shipping Environment for Mid-sized and Light Weight Packages with DHL. Singh

Navnit Narayan, Spring, 2007. Dynamic Measurement Analysis of Material Handling Equipment. Singh

Dimitris Gkinosatis, 2007. Conducting Nanoparticles and Their Polymeric Nanocomposites: Synthesis and Characterization of PLA-Multiwalled Carbon Nanotube Films. Mohanty

Apiradee Bhisanbut, 2007. The Extension of Chestnut Product Quality Using Modified Atmosphere Packaging and Vacuum Skin Packaging. Harte

Yu-Tai Kao, 2007. Light Transmission Rate of Milk and Riboflavin Photochemical Reactions in Milk. Twede

Viraporn, Voramanus, 2007. The Effect of Color Combination of Text Background on Noticeability and Legibility of Prescription Drug Warning Labels. Bix

Walker, Jessica, 2007. In-Store Merchandising for CPGs: The Role of CPG Point-of-Purchase Displays in the Changing Retail Landscape. Twede

Anderson, June, 2007. Packaging Economics - Curriculum Development. Harte

Kim, Ki Yong, 2008. Categorizing the Packaging Buy: Leverage vs. Strategic Relationships. Twede

Pakapol Kittinpinyovath, 2008. Measurement and Analysis of Shocks to Packages and Pails in Single Parcel Shipping Environment. Singh

Jason Niedzwiecki, 2008. A Packaging Metric Analysis of Flexible Packaging Systems for Military Rations. Hughes

Ethan Jacoby, 2008. Minimizing Prescription Drug Medication Errors by Utilizing a Risk Based Approach to Label and Package Design. Bix